 |
| الكاتب | ارسال |
|---|
dottie
Architect
| تاريخ الالتحاق: | الجمعة سيبتمبر 14th, 2007 |
| الموقع: | Wasilla, Alaska USA |
| عدد المواضيع: | 1063 |
| Exams Taken: | PD, GS, LF, ME, BD/MM, CD, SP, BP, BT | | Exams Passed: | PD, GS, LF, ME, BD/MM, CD, SP, BP, BT | | Describes Me: | Passed Northern Design w/ flying colors! Got all the ... |
| Status: |
Offline
|
| مستوى: |    |
|
كتب: الجمعة أبريل 25th, 2008 08:39 pm |
|
Hello Spokes,
I took the exam on March 28th, and passed! See my posting from last week. I was a bad girl who didn't study, but received a gift from the ARE Gods.
You are correct, the it should be rise/run. There were a couple of other mistakes as well, listed on some of the discussions from when it was posted. I don't have that with me.
Good Luck Spokes, don't stress about structures, wasn't near as hard as the stuff in school. Understand the concepts and how to do moments.
|
Spokes
Member
| تاريخ الالتحاق: | الثلاثا أوكتوبر 9th, 2007 |
| الموقع: | In The Saddle |
| عدد المواضيع: | 646 |
| Exams Taken: | PD, GS, LF, ME, BD/MM, CD, SP, BP, BT | | Exams Passed: | PD, GS, LF, BD/MM, CD, SP, BP, BT | | Describes Me: | In a holding pattern |
| Status: |
Offline
|
| مستوى: | |
|
كتب: الجمعة أبريل 25th, 2008 09:13 pm |
|
dottie wrote: Hello Spokes,
I took the exam on March 28th, and passed! See my posting from last week. I was a bad girl who didn't study, but received a gift from the ARE Gods.
You are correct, the it should be rise/run. There were a couple of other mistakes as well, listed on some of the discussions from when it was posted. I don't have that with me.
Good Luck Spokes, don't stress about structures, wasn't near as hard as the stuff in school. Understand the concepts and how to do moments.
Thanks for the words of encouragement dottie. I will need to look for those other errors and mark-up my sheet, Thanks.
The closer I get to my test day the more confidence I have. I wish I had structures in school but that's another story. Anyhow I know I can pass so that's what I will do. Good luck on your remaining exams.
edit: Apparently jimm... caught it. I should have seen that.
اخر تعديل في السبت أبريل 26th, 2008 02:31 am بواسطة Spokes
|
Markm
Member
| تاريخ الالتحاق: | الاثنين أبريل 28th, 2008 |
| الموقع: | Ponte Vedra Beach |
| عدد المواضيع: | 3 |
| Exams Taken: | | | Exams Passed: | | | Describes Me: | |
| Status: |
Offline
|
| مستوى: | |
|
كتب: الاثنين أبريل 28th, 2008 03:50 pm |
|
Yeah....I looked over this page, and I don't trust it. They have the formula listed for deformation which is pl over ae of course, but they also list this formula for coefficient of thermal expansion, which is incorrect.
This guide is very confusing to me.
|
timon
Member
| تاريخ الالتحاق: | الثلاثا أبريل 29th, 2008 |
| الموقع: | Nevada City, California USA |
| عدد المواضيع: | 3 |
| Exams Taken: | PD | | Exams Passed: | PD | | Describes Me: | |
| Status: |
Offline
|
| مستوى: | |
|
كتب: الثلاثا أبريل 29th, 2008 07:59 pm |
|
just a note to engage with you comrades. I'm back after a lengthy hiatus from the A.R.E. and ready to tackle this thing and get licensed, for crying out loud!!
starting with GS
Woo hoo!
|
Markm
Member
| تاريخ الالتحاق: | الاثنين أبريل 28th, 2008 |
| الموقع: | Ponte Vedra Beach |
| عدد المواضيع: | 3 |
| Exams Taken: | | | Exams Passed: | | | Describes Me: | |
| Status: |
Offline
|
| مستوى: | |
|
كتب: الثلاثا أبريل 29th, 2008 09:15 pm |
|
I just took Structures today. Jeesh.... I have no idea how I did. One thing I would strongly recommend is to really understand tension and compression...it was the logical basis for many many questions. Once you really understand this, you know where to place re bar, etc. Many questions like that.
There were two questions on coefficient of thermal expansion. Know that! It is not one of the listed formulas. Know Moments! WL SQUARED OVER 8.
No Truss calculations, thank god. But did ask to choose the correct forces in the joint of a truss.
Know Arrows/ forces in trusses!!!
Really focus on concepts......concrete is great in compression and bad in tension...etc.
Only about four questions were a complete guess for me, about 15 I had a fifty fifty chance on...narrowed it down.
Understand where shear occurs in a steel beam. One question showed a beam failing in shear at the connections and ask why it failed.
Based on my above analysis....can anyone guess if I passed?? I really can never tell with these things.
Mark :-)
|
Two4Design
Member
| تاريخ الالتحاق: | الاثنين مارس 5th, 2007 |
| الموقع: | New York, New York USA |
| عدد المواضيع: | 3 |
| Exams Taken: | PD, BD/MM, CD | | Exams Passed: | BD/MM, CD | | Describes Me: | |
| Status: |
Offline
|
| مستوى: | |
|
كتب: الاربعا أبريل 30th, 2008 05:26 am |
|
Mark I took the test on Moday the 28th and it appears that the test I took had a similar make up as what you described!...di we pass you ask..well my friend lets just wait and see as you know with all these test you just never know! so good luck my friend just wait for the response! 
|
Markm
Member
| تاريخ الالتحاق: | الاثنين أبريل 28th, 2008 |
| الموقع: | Ponte Vedra Beach |
| عدد المواضيع: | 3 |
| Exams Taken: | | | Exams Passed: | | | Describes Me: | |
| Status: |
Offline
|
| مستوى: | |
|
كتب: الاربعا أبريل 30th, 2008 01:41 pm |
|
Yes, the waiting game. I am on to MEP for now. This is my second go around on Mechanical.
Good luck to you as well!
Take care-
Mark
|
cdino
Member
| تاريخ الالتحاق: | الخميس سيبتمبر 18th, 2008 |
| الموقع: | Lafayette, Colorado USA |
| عدد المواضيع: | 212 |
| Exams Taken: | ME, BD/MM, CD, SP, BT | | Exams Passed: | ME, BD/MM, CD, SP | | Describes Me: | Anxiously awaiting BT results, taking BP 12/30 |
| Status: |
Offline
|
| مستوى: | |
|
كتب: الخميس نوفمبر 6th, 2008 03:42 pm |
|
| Is there a study guide by david thaddeus for the structural portions and if so where can I get it?
|
manincellv
Member
| تاريخ الالتحاق: | الاثنين يوليو 7th, 2008 |
| الموقع: | Dystopian Future - LEED AP |
| عدد المواضيع: | 293 |
| Exams Taken: | PD, GS, LF, ME, BD/MM, CD, SP, BP, BT | | Exams Passed: | PD, GS, ME, BD/MM, CD, SP, BP, BT | | Describes Me: | There's no certainty – only opportunity. |
| Status: |
Offline
|
| مستوى: | |
|
كتب: الاثنين نوفمبر 10th, 2008 11:20 pm |
|
From his live seminar I attended is where I got mine.
|
cdino
Member
| تاريخ الالتحاق: | الخميس سيبتمبر 18th, 2008 |
| الموقع: | Lafayette, Colorado USA |
| عدد المواضيع: | 212 |
| Exams Taken: | ME, BD/MM, CD, SP, BT | | Exams Passed: | ME, BD/MM, CD, SP | | Describes Me: | Anxiously awaiting BT results, taking BP 12/30 |
| Status: |
Offline
|
| مستوى: | |
|
كتب: الثلاثا نوفمبر 11th, 2008 05:29 pm |
|
| what is the name of the book and is there an isbn number
|
Flick
Member
| تاريخ الالتحاق: | الاحد يونيو 11th, 2006 |
| الموقع: | New York USA |
| عدد المواضيع: | 173 |
| Exams Taken: | PD, ME, BD/MM, CD, SP, BP, BT | | Exams Passed: | PD, ME, BD/MM, CD, SP, BP, BT | | Describes Me: | a-r-c-h-i-t-e-*-* |
| Status: |
Offline
|
| مستوى: | |
|
كتب: الاثنين ديسمبر 1st, 2008 06:37 pm |
|
Markm wrote: Yeah....I looked over this page, and I don't trust it. They have the formula listed for deformation which is pl over ae of course, but they also list this formula for coefficient of thermal expansion, which is incorrect.
This guide is very confusing to me.
Markm - Where do you see that they also listed this formula (Delta L = P x Loriginal / A x E) for coefficient of thermal expansion? I've looked at Page 2 and don't see how they've supposedly used the same formula (Delta L = alpha x Delta T x L original).
|
الوقت الحالي هو 11:08 pm | صفحة:   1 2 |
|
|
|
|
